Arduino Code Published
Bierbrand – Recipe of the Month
Please find below the two Arduino codes required to make your microstill work. The first program GetAddress is used to read the unique address of the temperature sensors. After the address has been read it needs to be inserted into the microstill code. GetAddress_ver0.1.pdf The second program microstill, runs the micrstill. After having adjusted the […]
Pictures of the microstill
Bierband or eau-de-vie de bière is obtained by the distillation of beer. It must be distilled in such a way that the distillation product has the flavor characteristics of beer. I was curious about the taste and how well it resembles the hops aroma. I picked a Pilsner beer from the local supermarked. Nothing special. […]
Explainer Video Posted
The microstill is complete! After publishing the drawings and the bill of material, a few days ago, I assembled the microstill. To be honest, the assembly was faster than expected. It took only 9 hours in total. Now, I cannot wait for the first runs to be completed.
Bill of Material ver 0.1
Happily presenting the explainer video on the microstill. Have fun!
All drawings and the bill of material are complete! The individual drawings are linked to the corresponding module at the main page. The complete BoM as per today can be found below. Module Item Description Quantity Unit 1 Electrical Enclosure 200x120x75 mm 1 pcs 1 Cable gland M25 1 pcs 1 Cable gland M16 3 […]